Isometric backed by Intercontinental Exchange in $50m Series A →

How to prepare a CBAM monitoring plan for verification

Isometric Team
November 20, 2026

Installations outside the EU that want their EU customers to declare actual emissions under the Carbon Border Adjustment Mechanism (CBAM) need a monitoring plan. It sets out how the installation collects data and calculates the emissions embedded in the goods it produces, and it's the document a verifier checks everything else against.

What is a CBAM monitoring plan?

A monitoring plan is the installation's written method for working out the embedded emissions of its CBAM goods. It covers what the installation produces, where its emissions come from, which data it collects, how it calculates emissions from that data, and how it checks the data is right.

The requirement comes from Commission Implementing Regulation (EU) 2025/2547, which sets out the minimum content every plan must include.

Who needs a monitoring plan?

The operator of the installation that produces the CBAM goods. EU importers don't prepare one. If an installation wants its EU customers to declare actual emissions rather than default values, it needs a monitoring plan, an emissions report calculated using that plan, and verification by an accredited verifier. Isometric's guide to actual emissions and default values explains why that's usually worth doing.

What does a monitoring plan include?

The regulation sets the minimum content, not the layout. The main areas a plan covers are these.

  • The installation and its goods. The operator and installation details, each CBAM good by its CN code, and any goods the installation makes that CBAM doesn't cover.
  • Production processes and routes. How each CBAM good is made, so the installation can assign emissions to the right goods.
  • System boundaries. Where the installation starts and stops, so no emission source is missed or counted twice.
  • Emission sources and source streams. Every piece of equipment that releases emissions, and every fuel and material that contributes to them.
  • Monitoring methods and calculation factors. How emissions are determined for each source and which emission factors, and other values, are used.
  • Precursors. The intermediate materials each process uses, such as clinker in cement, and where they come from.
  • Data quality controls. Who collects each piece of data, how it's checked, and how records are kept.

How does a verifier use the monitoring plan?

The verifier checks the installation's emissions report against its monitoring plan. They confirm the plan covers everything it should, then check the installation actually followed it during the year. Verification includes a visit to the installation, which is required the first time an installation is verified. If the verifier finds problems, the operator corrects them in both the monitoring plan and the emissions report. Isometric's guide to how CBAM verification works covers the process in full.

How to prepare a monitoring plan

  1. Map the installation. List every CBAM good by CN code, each production process and route, every emission source and source stream, and draw the system boundaries.
  2. Choose how each emission source is monitored. Installations can calculate emissions from activity data, such as fuel use, and emission factors, or measure them directly. Record the method and the factors for each source.
  3. Trace the precursors. Note which precursors each process uses and whether they're made on site or bought in. For precursors bought from other installations, find out whether the supplier can provide verified emissions data.
  4. Set up the data flow and controls. Decide who records each piece of data, where it's stored, how it's checked, and how the installation records any change to its equipment or method.
  5. Follow the plan through the year. Collect and keep the records the plan requires, so the verifier can trace each figure back to its source.
  6. Prepare the emissions report. Once the year ends, calculate the embedded emissions of each good using the plan's methods, then send the plan and report to the verifier.

Isometric's experts build monitoring plans with installation operators, from mapping the installation to the emissions report.

The Commission's CBAM verification guidance sets out what verifiers check.

When should the monitoring plan be in place?

Before the reporting year starts, or as early in the year as possible. The plan sets out how data is collected across the whole year, and the verifier checks that the installation followed it.

How Isometric helps

Ready for CBAM is advisory and software from Isometric for installation operators outside the EU. It brings together Isometric's carbon accounting experts and AI agents to turn raw production data into a monitoring plan and emissions report that's ready for verification.

Get ready for CBAM

Ready to certify?

Fast, accurate certification for project developers and buyers.

Backed by ICE, owner of the New York Stock Exchange
CERTIFICATE